Re-Refining Used Motor Oil Drastically Outpaces Crude Oil Efficiency

image 436
🔊 Listen to the summary

Producing two and a half quarts of fresh lubricating engine oil requires just a single gallon of collected used motor oil, compared to roughly 42 gallons of crude petroleum needed to achieve the same yield.

According to the Environmental Protection Agency, re-refined motor oil performs just as well as newly refined oil, making the recycling method the agency’s top preference for handling waste lubricant. Even with significant conservation benefits, estimates indicate that merely 20 percent of spent motor oil currently makes it through a re-refining facility. High initial infrastructure costs, regional distance from collection hubs to processing plants, and chemical contamination often keep the majority of drained oil from undergoing full reprocessing.

Large-scale operations demonstrate the output potential of modern recycling. Safety-Kleen’s Fallon Refinery takes in around 80,000 gallons of dirty motor oil each day, operating at a capacity of 28 million gallons annually. That daily intake yields approximately 55,000 gallons of vacuum gas oil, which is subsequently converted into base oil alongside asphalt extenders, vacuum gas oil, and industrial fuels.

Re-refining used lubricant involves isolating usable hydrocarbons from accumulated engine debris like dirt, metals, and water. Technicians first screen incoming barrels for disruptive chemicals before boiling off moisture. Lighter fuels and glycol are extracted next, followed by middleweight and heavy fuel stripping. Refiners then employ vacuum distillation to pull out dense residual oils, before applying hydrogen to strip remaining traces of chlorine, nitrogen, sulfur, and heavy metals. Once clean base oil remains, standard additives are blended back in to meet retail specifications.

Disposing of used oil outside of dedicated recycling pathways carries severe environmental risks, as a mere quarter-gallon of dumped motor oil can spoil 250,000 gallons of fresh water. Oil that bypasses re-refining is frequently burned for industrial heat, processed as refinery feedstock, or filtered on-site for lower-grade reuse without fresh additive packages.

Source: jalopnik.com