Tremec Demonstrates Working Manual Transmission Swap for Mid-Engine Chevrolet C8 Corvette

image 876
🔊 Listen to the summary

Transmission supplier Tremec has engineered a functional manual gearbox for the Chevrolet C8 Corvette, demonstrating that the mid-engine sports car can run a three-pedal setup despite General Motors producing the vehicle exclusively with a dual-clutch automatic.

The manual conversion was showcased at the Motorsports Gateway private track in Howell, Michigan, installed inside a track-prepped C8 race car built by Peitz Performance. According to hands-on testing by The Drive, the manual unit drops directly into the space occupied by the factory dual-clutch transaxle without requiring bespoke adapter hardware. The conversion did require cutting into the floor tunnel to install the clutch assembly, though the factory pedal box accommodated the third pedal with room to spare.

Because the mid-engine layout places the transaxle far behind the cockpit, Tremec utilized remote shift cables rather than a direct mechanical linkage like the setup found on front-engine cars using the TR-6060 six-speed. This cable arrangement results in a shift feel that is less notchy and slightly less mechanically direct than traditional front-engine manual transmissions, smoothing out some of the gearbox’s typical resistance.

Acquiring the setup remains an expensive proposition. The standalone Tremec gearbox currently runs roughly $75,000, bringing the overall investment of a converted C8 close to the cost of a factory Corvette Z06. Tremec indicated that costs will decrease as manufacturing volume scales, noting that other automotive manufacturers have expressed interest in utilizing the high-torque manual transaxle for their own programs.

Source: The Drive