More than half of the traffic reaching Google is now routed over IPv6, marking a significant milestone in the decades-long transition away from the internet’s exhausted original addressing system. Google’s tracking data recorded IPv6 adoption at just under 51 percent in October, a steady increase from roughly 33 percent measured during the same period in 2020.
Adoption levels vary significantly across regions and service providers. Globally, France leads adoption with 87 percent of traffic using IPv6, while the United States sits at 55 percent and China trails at just over six percent. In the US, Asia-Pacific internet registry data shows that around 85 percent of Comcast and AT&T subscribers have access to the protocol, compared to under 25 percent for Frontier customers.
The standard was established in 1995 to replace IPv4, a 32-bit protocol capped at roughly 4.3 billion addresses that officially ran out of unassigned address blocks between 2011 and 2015. To compensate, network providers and home routers implemented Network Address Translation (NAT) and carrier-grade NAT, routing multiple devices and households through shared public addresses. While carrier-grade NAT prolonged IPv4’s lifespan, testing has shown it can disrupt peer-to-peer connections such as online multiplayer games. By contrast, IPv6’s 128-bit architecture provides roughly 340 undecillion addresses, allowing every connected device to hold its own public address.
Despite the architectural benefits, activating IPv6 will not increase Wi-Fi speeds. Most modern hardware operates in a dual-stack configuration that supports both protocols concurrently, and network applications like Thread smart home mesh networking already rely on the newer format. However, transitioning requires router firewalls to actively block unsolicited inbound traffic that NAT historically masked, and virtual private network clients lacking IPv6 support can inadvertently leak traffic outside encrypted tunnels.
Source: engadget.com



