Custom Subaru STI Build Moves Turbocharged Flat-Six Engine to the Trunk

image 661
🔊 Listen to the summary

A custom automotive project by the builders at Smeedia is transforming a Subaru WRX STI into a rear-engine machine by installing a turbocharged Subaru EG33 flat-six engine directly into the vehicle’s trunk space.

The extensive conversion retains all-wheel drive while completely rearranging the vehicle’s drivetrain layout. To accommodate the rear-facing setup, the factory six-speed transmission uses a custom ring-and-pinion set that reverses power delivery so the gearbox can mount on the opposite side of the six-cylinder engine. Significant structural fabrication was required to squeeze the wider boxer engine between the STI’s rear shock towers, prompting the team to install custom tubular framing across the rear chassis to restore structural rigidity.

With the engine bay emptied of the traditional boxer-four powerplant, the front of the vehicle now houses a dedicated fuel cell. Up front, the chassis will receive additional tube work once other aspects of the project are settled. At the rear, the exhaust system mounts directly to custom brackets welded onto the bumper crash bar, leaving tightly packed plumbing across the rear compartment.

The car, a chassis nicknamed “Blu,” previously ran an EG33 in the standard front-engine configuration. That initial iteration suffered catastrophic engine damage under boost when incorrect timing bent two valves and warped the remaining 22. While the mechanical packaging is coming together in the new rear-engine layout, the vehicle remains an unfinished work in progress. Crucial systems, including a complete wiring harness and cooling infrastructure, must still be fabricated before the turbocharged flat-six can be started.

Source: thedrive.com